The simplest and least expensive method of washing is a normal wash. From household to fabric manufacturers everyone uses it for keeping fabric and apparel clean. By using this wash method, dirt and starch components from the new textile are also eliminated. If You are the one who sources fabric then this write up and washing technique is for you. Because of this, while wearing the clothes after washing, they feel soft and have a fresh appearance. By changing the parameters for the typical wash of clothing—such as the temperature, duration, amount of detergent used, etc.—the washing result may be changed. Here is how a typical wash on a garment works:
Normal washing procedure
The number of clothing to be cleaned in a batch should be calculated in advance based on the washing machine’s capacity. Considered in this instance is a batch of 100kg cotton shirts. Liquor ratio 1: 5 is taken into consideration, and according to the chosen liquor ratio, 500 liters of water and 100 kg of clothing are placed into the washing machine. Then the machine begins, and the liquor is mixed with 1 kg of detergent at 1%. The temperature of the fluid began to rise to between 400°C and 600°C as steam delivery began.
The liquor temperature should be employed more if the washing effect is more important. Washing might take anywhere between 15 and 30 minutes. The washing duration should be increased if the washing effect is more important. Alcohol and material both move during washing. Starch components from the fabric of the garment are transferred to the liquid by mechanical agitation and chemical action of the detergent. After the washing cycle is complete, the alcohol is drained out and 500 liters of new water are once again put into the machine. The garment fabric is once more washed using just water at 400C for 5 minutes in order to eliminate any clinging starch materials. The alcohol is then removed.
Washing machine work
Once again, 500 liters of water and 0.1 to 0.5% softener are added to the washing machine, and the cycle is continued for an additional 5 to 10 minutes to boost the softness of the clothing. Drop the alcohol after that and pack the clothing into the cart. To remove excessive water from the cleaned clothes, they are subsequently fed into the hydro-extractor machine. The clothing is then removed from the hydro-extractor machine and reloaded into the drying machine, where it is dried using hot air or steam flow.
Back strains may develop difficulties as a result of garment washing. Back stains are coloured stains that come from coloring ingredients in the fabric of the garment that are partly removed during washing and then redeposited on the fabric of the pocketing or lining of the garment. The development of back stains on clothing as a result of washing is regarded as a washing fault. The buyer will not take back stains. Therefore, appropriate measures should be taken to prevent back strain. The following are some likely causes of back stains on clothing after washing:
- Usage of fabric softener in excess.
- If the color of the cloth is of poor quality.
How to resolve the problem
The following steps need to be performed in order to combat the issue of back stain formation:
- Wash the clothing completely without fabric softener and check the back for stains. If no back stain appears, using too much softener is the cause of any back strains that do appear. As a result, using softener should be cut down. If there is evidence of a back stain, it is obvious that the garment’s use of inferior coloured materials contributed to the development of the stain.
- Prior to a regular wash, a garment that has a low-quality color requires pre-treatment. The prior therapy: Place 100 kg of laundry in the washer together with 500 liters of water at a L: R = 1: 5 ratio. 1kg of color fixing agent at 1% should be added to the liquor before turning on the machine. To boost the temperature to 400C and continue processing for 10 minutes, turn on the steam supply. Drop the alcohol, unload the clothing, hydro-extract the clothing, and then dry the clothing in the dryer. The issue of rear stain creation might be prevented if pre-treated clothing is washed normally.
Normal washing is a very common procedure for washing. It works for those fabrics which do not require special care instruction. With less equipment and process this process can be done with effectiveness. You just have to remember the ratio of liquid and detergent. Further, if you are planning to source fabric from any source you should know this. It will help you in keeping your material safe for a longer period. Also, with fabriclore you can have a chain of fabric manufacturers that provide high quality certified fabrics.